Disc Couplings – Failure Analysis
If history is any judge, this post will be by far the most popular in our mini-series of three blogs on disc couplings. The first post provided a broad overview of disc couplings, and the second posts covered a number of key terms used when talking about disc couplings… but this third post is on the riveting topic of disc coupling failures.
To date, the Coupling Answers blog posts coupling failures (including Jaw Coupling Failure Analysis , Gear Coupling Failure Analysis, and Grid Coupling Failure Analysis) have been extremely well-received and appreciated by our amazing customer base. One of the reasons these posts have been so well received is that so few people like to talk about failures. Fortunately, we at Coupling Services Ltd, are confident enough in our products, design capabilities, and general understanding of power transmission that troubleshooting isn’t something we shy away from. (In fact, for Hannover Fair 2015, we actually hosted a Coupling Solutions Learning Lab that was loaded with actual failed couplings. This caught countless German engineers completely off-guard.) Moving on…
Like many other coupling types, disc couplings often fail in with telling or “signature” ways that point to a likely culprit. As pictured at right, when a disc coupling is subject to excessive misalignment it is likely to experience disc pack cracking near the bushings, with the outer layers fracturing first.
Note: Given disc packs generally crack from the outer layers in, it is certainly possible that a coupling will continue to transmit torque/function with cracks in the outside layers. This means that it is still important to inspect the disc pack on a periodic basis even if the coupling appears to be functioning properly. Fortunately disc packs can generally be inspected without disassembling the coupling, and possibly even when the coupling is running (by using a strobe light assuming the coupling guard is not solid steel).
If misalignment is the likely source of a disc pack failure, it is important to realign the coupling prior to restarting the system, less the issue repeat itself. (Two options to consider when realigning a coupling are laser alignment and dial indicators.) An additional step you can take if you are not using a scalloped disc pack by Coupling Services Ltd (which offers increased misalignment handling over legacy designs), you can source a replacement coupling from us!
Torque Overload Failures
Disc Pack Torque Overload Failure
Torque overload failures in disc packs look different from misalignment failures in that the fatigue cracks tend to form in the center of the disc pack rather than up against the bushings (as pictured at right).
A second thing to look for when suspecting torque overload on this disc pack is any evidence that the disc pack layers (or laminates) are separating or ballooning away from each other in the center sections between bushings.
Bent Disc Pack Bolts
In addition to the disc packs themselves, the bolts used to connect the disc pack to the flanges may be bent or distorted. Such distortions are another excellent indication that the coupling is seeing torque in excess of what it was designed to handle.
Disc Coupling Hub Burst
A third and final common way that torque overload reveals itself in a disc coupling is if a coupling hub actually bursts over the corner of the keyway. This is a failure mode common across many coupling types, and the reason the coupling fails at this point is because, due to the cut keyway, this is the weakest point in the hub.
Installation & Fastener Failures
One of the fastest way to damage a disc coupling during installation is to use impact wrenches. (Do not do this!) Not only does using an impact wrench raise the potential of twisting the disc pack (pictured at right) in a destructive manner, but it also raises the possibility of friction welding the fastener bolts to either the disc pack and or the connected flange. Fasteners should be lubricated prior to installation and torqued with care.
On the other end of the spectrum, improper torque of the fasteners may cause them to loosen. This loosening can then lead to damage and wear to the fasteners as well as hole elongation and cracking of the disc packs. To avoid either over or under torqueing the fasteners, be sure to read and follow the disc coupling’s installation instructions. (See website for more info)
While disc couplings generally hold up very well to many environmental conditions, they are certainly not impervious to everything. As such, it is critical that coupling users understand what corrosive agents may be present for a given application, and that the disc coupling is designed to operate under those conditions. (Pictured at right is a circular, non-scalloped, disc pack layer that has been corroded.)
Having just covered misalignment, torque overload, installation, fastener, and environmental failures of disc couplings, a natural question might be “How long is my coupling going to last?” Unfortunately, like all other coupling type, disc coupling life is not generically predictable as it is highly dependent upon the application and the misalignment of the given system it is driving. Shaft alignment does correlate strongly with longer coupling life… so taking the time to align the system properly with periodic checks should pay lasting dividends and not be overlooked.
To learn more about Coupling Services Ltd , disc coupling solutions for your applications, please check out Coupling Services Ltd product pages & catalogues, the non-lubricated section of The Coupling Handbook, and/or pick up the phone ask to speak with a specialist.